{"product_id":"s5-inserter","title":"S5 Inserter","description":"\u003ch1\u003eAbout S5 Inserter\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eExtra tall adjustable-height scleral lens insertion stand\u003c\/li\u003e\n\u003cli\u003eEmbedded rechargeable light\u003c\/li\u003e\n\u003cli\u003eBase suctions to countertop\u003c\/li\u003e\n\u003cli\u003eFor use with DMV Vented Scleral Cup (1 included)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStand height: 10\" extending to 29.5\". Base is 2 3\/8\" diameter.\u003c\/li\u003e\n\u003cli\u003eKit includes: Stand with light; DMV Vented Scleral Cup; USB\/USB-C charging kit; QR code for manual; rigid travel case (5.5\" x 8.75\" x 2.75\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eDescription (Rebecca's)\u003c\/h1\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eI have only recently interacted with people who are using this tool, so while i've known about the S5 products for a long time, I'm not yet very experienced with identifying which people benefit the most. I am looking forward to hearing from more users. If you try it, please make sure to either post a review or send me your thoughts so I can continue to adapt my description to be as helpful as possible.\u003c\/p\u003e\n\u003ch2\u003eThe big picture\u003c\/h2\u003e\n\u003cp\u003eThe most important things to know about this product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThis is THE scleral lens insertion stand for tall people.\u003c\/li\u003e\n\u003cli\u003eThe light is very bright.\u003c\/li\u003e\n\u003cli\u003eThe base suctions to the counter. \u003c\/li\u003e\n\u003cli\u003eIt comes with support.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan style=\"background-color: rgb(247, 247, 145);\"\u003eThis is not a product that people buy \"just because\" or \"just in case\". This is the product you purchase when standard methods aren't working AND\/OR when you need as much extra support as possible.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eDr Mahgoub\u003c\/h2\u003e\n\u003cp\u003eThe S5 and S5 Mini are designed and sold by Dr. Fayiz Mahgoub. Dr. Mahgoub is doing a lot of good work educating his colleagues about the need for assistive technologies for lens handling. Part of the package when you purchase this product is support for your learning process, so if you are struggling a lot with lens insertion I encourage you to reach out to him. Product and warranty support are all exceptional.\u003c\/p\u003e\n\u003ch2\u003eThe light\u003c\/h2\u003e\n\u003cp\u003eThere is an orange\/yellow light embedded in the stand. It is very bright and for me, uncomfortably so. Do not make the mistake I did, which was to turn it on before I had added the plunger. Even then, when it's new, personally I find it much too bright. However, I have learned from long-time users of this product that not only does it dim somewhat over time compared to when it's new, but there are also people who like it this bright. \u003c\/p\u003e\n\u003ch2\u003eThe stand\u003c\/h2\u003e\n\u003cp\u003eAs you can see in the pic, it's starts with a suction cup, then a durable attachment point, a telescoping thing like a radio antenna, and finally the stand proper, that is, a 4\" black thing containing the light and power source plus the orange extension where the scleral cup is placed.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eMy first step after securing the suction cup to the counter would be to lay a terry towel all round to make sure there's a soft landing. I am a bit paranoid about tall stands, having tested some interesting prototypes from other designers over the years. (I'm always thinking, will my lens fall off and crack?  Hence the towel.)\u003c\/p\u003e\n\u003cp\u003eI prefer putting my lenses in standing up rather than seated, so if I actually needed a stand, I'd consider this for myself to use at work. When attached to my desk, I can extend it to 22\" and then it's the perfect height for me. The full extended height is almost 30\", so it should be OK for the tallest people if they attach it to something counter-height rather than desk-height.\u003c\/p\u003e\n\u003cp\u003eOtherwise, it performs the same function as other stands, as in, the purpose is to hold the lens in a plunger so that you can bring your eye to the lens rather than bringing the lens to your eye.\u003c\/p\u003e\n\u003ch1\u003eDescription (Manufacturer's)\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/augmentedvisionlabs.com\/wp-content\/uploads\/2026\/04\/S5-Inserter-User-Manual-4-6-26.pdf\"\u003eClick here to download the user manual for the S5 Inserter\u003c\/a\u003e\u003c\/strong\u003e (or see copy below)\u003c\/p\u003e\n\u003ch2\u003eAbout\u003c\/h2\u003e\n\u003cp\u003eThe S5 Inserter was developed by Dr. Fayiz Mahgoub to eliminate the challenges that his patients experienced with inserting their scleral and hybrid lenses. Its features include\u003c\/p\u003e\n\u003ch2\u003eUnmatched Support\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes with unlimited access to 1 on 1 coaching with Dr. Mahgoub. Available 7 days a week via phone, text, email and video chat\/FaceTime.\u003c\/li\u003e\n\u003cli\u003eIncludes a detailed user manual with instructions and tips to help make your lens insertion experience as safe and efficient as possible (via website\/qr code - no paper manual included)\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 year manufacturer warranty that covers parts, labor and shipping within the Unites States.\u003c\/li\u003e\n\u003cli\u003eComes with a 90-day money back guarantee to give you peace of mind as you learn the insert your lenses. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHands-free lens stabilization:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGives the user two free hands to hold their eyelids open which helps counter the human blink reflex.\u003c\/li\u003e\n\u003cli\u003eHelps reduce spilling of the contact lens solution which decreases the chance of air bubbles getting trapped under the lens. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLED light source:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnables the user to more easily align their eye with the center of the lens during insertion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdjustable height:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAllows the user to position the lens at the most comfortable height for insertion.\u003c\/li\u003e\n\u003cli\u003eThe height from the base of the device to the top of the lens holder can be adjust from 10.5 inches (27 cm) to 2 ft 6 inches (76 cm).\u003c\/li\u003e\n\u003cli\u003eOptimized for lens insertion while standing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eS5 Inserter User Manual\u003c\/h2\u003e\n\u003ch3\u003eSafety precautions (Please read before use)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlease consult with your eyecare provider for instructions on how to clean and maintain your lenses. Your doctor will recommend the appropriate lens cleaning and maintenance products that you should use with your lenses. \u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eIf you experience pain or a decrease in the quality of your vision after using the S5 Inserter stop using the device and contact your eyecare provider immediately.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Holder:\u003c\/strong\u003e \n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePlease read the insert provided with the lens holder before using it.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eALLERGY NOTICE: \u003c\/strong\u003eThe lens holder provided with the S5 Inserter (known as the DMV Vented Scleral Cup) contains latex. \u003c\/li\u003e\n\u003cli\u003eThe lens holder provided with the S5 Inserter is only intended for use in lens insertion. \u003cspan style=\"text-decoration: underline;\"\u003eDo not use the provided lens holder during lens removal.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHOKING HAZARD: \u003c\/strong\u003ePlease keep the lens holder out of reach of the children. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWarranty Information\u003c\/h3\u003e\n\u003cp\u003eYour S5 Inserter Comes with a 1-year warranty which covers the replacement of any components that fail to operate due to manufacturer defect. Register your device at \u003ca href=\"https:\/\/augmentedvisionlabs.com\/warranty\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/augmentedvisionlabs.com\/warranty\/\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eDevice Maintenance\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlease clean the rubber lens holder with an alcohol wipe \u003cspan style=\"text-decoration: underline;\"\u003ebefore every use\u003c\/span\u003e and \u003cspan style=\"text-decoration: underline;\"\u003eallow it to dry completely\u003c\/span\u003e before placing a lens on it. The lens holder should be replaced at least once every 3 months.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImmediately after inserting your lenses, please take a moment to remove any liquid that may have spilled onto your device. Do not discconect the light unit from the telescoping arm until after you have dried the outside of the light unit with a paper towel. This will help prevent water from getting into the electronic components of your device.\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003ePlease make sure that the storage case for your device is completely dry before storing the device in it. If you store containers that hold liquids (ex. contact lens cases) in your case, please ensure that they are securely closed to prevent liquid damage to your device.\n\u003col\u003e\n\u003cli\u003eWe recommend cleaning the outside of your device as well as the inside of your storage case \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eat least once per week\u003c\/span\u003e\u003c\/strong\u003e with alcohol wipes. After cleaning, make sure that all parts are completely dry before storing them.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe bottom of the suction base should be cleaned periodically with an alcohol wipe to ensure maximum suction. \u003c\/li\u003e\n\u003cli\u003eCharging the light unit:\n\u003col\u003e\n\u003cli\u003eWhen you notice the light becoming dim, its time to charge the light unit. \n\u003col\u003e\n\u003cli\u003eLocate the USB port on the bottom of the light unit.\u003c\/li\u003e\n\u003cli\u003eConnect the female end of the provided USB extension cable to the bottom of the light unit. \u003c\/li\u003e\n\u003cli\u003eConnect the male end of the cable to a desktop or laptop computer. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe light unit will reach a full charge after 1 hour of being plugged in.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003ch4\u003eBefore lens insertion\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003ePlace the suction base on a smooth, flat surface. Ensure that both the bottom of the suction base and the surface are clean and dry. \u003c\/li\u003e\n\u003cli\u003eHold down the outer edge of the suction base while pulling metal telescoping arm upward until it locks into place in the vertical position. This will engage the suction of the base. \u003c\/li\u003e\n\u003cli\u003eOnce the telescoping arm is in the vertical position, slide the base of the arm forward for increased stability.\u003c\/li\u003e\n\u003cli\u003eExtend the telescoping arm to the desired height.\n\u003col\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eWe recommend that you keep the height as low as possible when you are first learning to use the device to reduce the chance of your lens being accidentally bumped off the lens holder and falling from a high distance. This could cause the lens to become lost or damaged. When you become confident in your ability to consistently insert the lens without it falling, you can increase the height to your preferred height for lens insertion. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eScrew the light unit into the light unit dock.\u003c\/li\u003e\n\u003cli\u003eInsert the rubber lens holder into the orange lens holder dock.\u003c\/li\u003e\n\u003cli\u003eWash your hands with a scent-free, moisturizer-free soap for 20 second and dry them with a lint-free towel.\u003c\/li\u003e\n\u003cli\u003eClean the rubber lens holder with a disinfecting alcohol wipe. \n\u003col\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eAllow the lens holder to dry completely before placing your contact lens on it. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eClean the upper segment of the light unit (the part that twists) with a disinfecting alcohol wipe. \n\u003col\u003e\n\u003cli\u003eYou can use the same wipe that you previously used to clean the lens holder. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwist the top half of the light unit counterclockwise to activate the light.\u003c\/li\u003e\n\u003cli\u003eInspect your lens to make sure it is clean and free of damage then place it on the rubber lens holder. \n\u003col\u003e\n\u003cli\u003eIt is recommended to rinse your lens with preservative free saline if it was previously stored in a multi-purpose cleaning solution.\u003c\/li\u003e\n\u003cli\u003eIf your lens has a black dot that is used for positioning your lens, please make sure that the dot is placed at the position recommended by your doctor (example: place the black dot at the 6 o'clock position). \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eFill the lens bowl with a preservative-free saline solution that is approved by your doctor.\n\u003col\u003e\n\u003cli\u003eAdd the saline until the level rises \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eabove \u003c\/span\u003e\u003c\/strong\u003ethe edge of the lens.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eLens insertion\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003ePlace your head directly over the lens, making sure that your head is level with the survace that your device was placed on. Your chin should be tucked in toward your chest. \u003c\/li\u003e\n\u003cli\u003eUse both hands to firmly hold your upper and lower eyelids open. \n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip #1\u003c\/strong\u003e: Place your fingers as close as possible to your eyelashes \u003cspan style=\"text-decoration: underline;\"\u003e(without touching your eyelashes)\u003c\/span\u003e to get the best grip on your eyelids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip #2: \u003c\/strong\u003ePull your upper lid upward and pin it against your brow bone by pressing your finger in towards your face. Pull your lower lid down and pin it against your cheek bone by pressing your finger in towards your face. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKeep both eyes open\u003c\/span\u003e\u003c\/strong\u003e and slowly move your head down toward the lens until your eye makes contact with the lens. \n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip #1\u003c\/strong\u003e: Focus on the light as you move closer to the lens. The light will look perfectly round if you are lined up with the center of the lens. \u003cspan style=\"text-decoration: underline;\"\u003eIf the light does not look round, you will need to adjust the position of your head until it becomes round.\u003c\/span\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip #2\u003c\/strong\u003e: The first thing you will feel is your eye touching the saline solution. \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDo not slow down when you feel the saline. Keep going at the same pace until you feel the pressure of the lens being pressed against your eye.\u003c\/span\u003e\u003c\/strong\u003e It is normal for saline to spill out of the lens bowl during this process.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnce you feel the pressure of the lens being pressed onto your eye, move your head up and away from the device and \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eslowly \u003c\/span\u003e\u003c\/strong\u003erelease your eyelids. \u003c\/li\u003e\n\u003cli\u003eTwist the top half of the light unit clockwise to turn the light off. \u003c\/li\u003e\n\u003cli\u003eFor your second eye: \n\u003col\u003e\n\u003cli\u003eRepeat steps 10 through 12 in the \u003cstrong\u003e\"Before Lens Insertion\"\u003c\/strong\u003e section to prepare your second lens for insertion\u003c\/li\u003e\n\u003cli\u003eRepeat steps 1 through 5 in the \u003cstrong\u003e\"Lens Insertion\"\u003c\/strong\u003e section to insert your second lens. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eAfter inserting your lenses, please take a moment to check for air bubbles. \n\u003col\u003e\n\u003cli\u003eCover one eye at a time to see if you can notice any air bubbles in your line of sight.\u003c\/li\u003e\n\u003cli\u003eYou can also use the mirror to inspect the lens on your eye and check for air bubbles. Shining a flashlight on your face will help provide better lighting.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eIf air bubbles are present, you must remove the lens and re-insert it.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eAfter Lens Insertion\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRemove the rubber lens holder from the light unit.\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKeep the light unit connected to the telescoping arm and dry off the outside of the light unit with a paper towel. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eDisconnect the light unit from the telescoping arm.\u003c\/li\u003e\n\u003cli\u003eAdditional drying for the light unit:\n\u003col\u003e\n\u003cli\u003eTurn the light unit upside down to get rid of any liquid that has built up inside the orange lens holder dock. Use a paper towel or a q-tip to soak up any liquid remaining in the lens holder dock after draining. \u003c\/li\u003e\n\u003cli\u003eIf you see liquid on or near the USB port of the light unit, soak it up with a paper towel or q-tip. \u003cspan style=\"text-decoration: underline;\"\u003eIf there is no liquid on the USB port, then please avoid touching it. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eDetach the base:\n\u003col\u003e\n\u003cli\u003eCollapse the telescoping arm down to its shortest height.\u003c\/li\u003e\n\u003cli\u003ePush the telescoping arm to the horizontal position to break the suction of the base. \n\u003col\u003e\n\u003cli\u003eIf the suction doesn't release right away, it may be necessary to use a fingernail or a plastic card to separate the edge of the base from the surface that it is suctioned to.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrying the telescoping arm and base:\n\u003col\u003e\n\u003cli\u003eTurn the telescoping arm upside down and shake well to remove any liquid that is trapped between the segments. \u003c\/li\u003e\n\u003cli\u003eExtend the telescoping arm to its full length and use a dry paper towel to remove all remaining moisture on the telescoping arm and the suction base. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease ensure that the storage case used to store the device is completely dry before using it to store your device. \u003c\/strong\u003eThis is important for reducing the growth of microbes in the storage case as well as reducing the chance of moisture causing damage to the electronics of your device. \n\u003col\u003e\n\u003cli\u003eIt is recommended that you use alcohol or another disinfecting solution to clean the inside and outside of your storage case \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eat least\u003c\/span\u003e\u003c\/strong\u003e once per week. After cleaning, make sure that the case dries completely before using it to store your device and lens accessories. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Augmented Vision Labs","offers":[{"title":"Default Title","offer_id":50475044700203,"sku":"AVL-PN S5 Inserter","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2575\/9928\/files\/Newproduct_5_8bf1d265-17c3-4429-bd6b-c3fced33ffb9.png?v=1790351170","url":"https:\/\/dryeyeshop.com\/products\/s5-inserter","provider":"DryEyeShop","version":"1.0","type":"link"}