About Purilens Plus 24-Pack

Description (by Rebecca)

Updated May 2022

Purilens Plus Saline has been on the market for about 20 years. However, it was not nationally known until 2016. When Unisol 4 was discontinued - followed soon after by Simply Saline, another borate-buffered preservative-free saline - Purilens Plus quickly became the go-to product for people seeking buffered preservative-free saline, including for use filling scleral lenses. In fact, it was the only equivalent on the US market until Bausch & Lomb introduced Scleralfil in 2017. (A few years later, Contamac introduced Nutrifill, another type of buffered saline, which is a particular favorite.)

Filling scleral lenses was an "off-label" use of Purilens for. along time, ust as it had been for Unisol 4. Recently, Purilens Plus has been FDA cleared for filling sclerals. At the same time, however, there have been studies that show a concerning level of risk of contamination in open Purilens bottles. Many physicians recommend not using Purilens for filing scleral lenses, at least not more than 48 hours after opening a bottle. Please consult your scleral lens specialist for instructions! Safety matter!

Purilens remains a popular product for many scleral lens users because it is the most cost-effective buffered preservative-free saline. For those who have frequent rinsing needs, it's a particularly helpful product. 

Alternatives?

For more information, please see our Product Guide to Preservative Free Saline Options. Please note that this is not entirely up to date! Please call with questions.

Limitations

Depending what you are using it for, some users may not use up the entire bottle within the 15 days recommended by the manufacturer. Please put safety first. Preservative-free solutions are not protected against contamination. Ask your scleral lens specialist for guidance!

Description (manufacturer's)

Purilens Plus saline solution is preservative-free, pH-balanced, sterile, aqueous isotonic solution of sodium chloride, buffered with boric acid and sodium borate. Does not contain chlorhexidine, thimerosal, or other mercury-containing compounds.

Actions 

Rinsing with PuriLens solution removes loosened debris from the lens surface prior to cleaning and disinfecting with the PuriLens system. 

Keeps the lens wet (hydrated) during PuriLens System cleaning and disinfection. 

Indications

PuriLens solution is indicated for use in rinsing, PuriLens system cleaning and disinfection, and storage of SOFT (hydrophilic) contact lenses. 

Contraindications

None known

Warnings

PuriLens solution is sterile prior to opening. Because it contains no preservatives, it will not remain sterile indefinitely after opening and, therefore, should not be used as an eye drop. Do not touch the tip of the contained to any surface since this may contaminate the solution. DO NOT USE IF SOLUTION IS CLOUDY OR DISCOLORED. 

Precautions

• Do not use if unused, unpierced bottle is damaged and leaking.
• Never reuse solution
• Do not transfer saline solution to another container
• Fresh solution should be used for every cleaning/disinfection cycle
• Do not store lenses in water, or in a non-sterile solution
• Use before expiration date stamped on container
• After breaking the original seal, keep container tightly closed when not in use
• Discard bottle and contents 14 days after opening. Record dated opened in space provided on bottle label
• Never touch the tip of container to any surface
• Store solution at room temperature

If you notice any of the above problem, remove and examine your lenses. If the problem stops and the lenses appear to be undamaged, rinse your lenses using PuriLens solution, then clean and disinfect the lenses in your PuriLens unit and reinsert them. If the problem continues or a lens appears to be damaged, IMMEDIATELY remove your lenses and IMMEDIATELY consult your eye care practitioner. Do not reinsert a damaged lens. 

If any of the above symptoms occur, a serious condition such as infection, corneal ulcer, neovascularization or iritis may be present. Seek immediate professional identification of the problem and treatment to avoid serious eye damage. 

Directions for use

Inside the bottle cap is a molded insert that will pierce the container. To open the bottle, first remove the cap and discard the whit plastic restraining ring. Avoid touching the tip of the bottle. Replace the cap then press down ad turn the cap clockwise to pierce the container. 

Rinse

Rinse, clean, and disinfect your lenses each time you remove them. 

Rinse your lens thoroughly with PuriLens solution by holding the lens between the forefinger and thumb of one hand and directing a steady stream of Purines solution onto the lens for ten (10) seconds. 

Always rinse the same lens, right to left, first to avoid mix-ups and put that lens into the correct chamber of the lens storage case.